查看(SKU:RB-02S088)電流檢測傳感器的源代碼
←
(SKU:RB-02S088)電流檢測傳感器
跳轉至:
導航
、
搜索
因為以下原因,你沒有權限編輯本頁:
您剛才請求的操作只有這個用戶組中的用戶才能使用:
用戶
您可以查看并復制此頁面的源代碼:
[[文件:.jpg|500px|縮略圖|右]] ==產品概述== 此產品由一個電流感應器TA12-200組成構成??梢詫⒋蟮碾娏髁哭D(zhuǎn)換為幅度小的電壓量輸出。該模塊采用沉金工藝,外觀更加美觀,同時采用防插反3Pin接口,操作更加安全,插口一邊有大寫字母A表示該模塊位模擬量傳感器,另一邊是電流表的圖標標志表示該模塊具有測試電流的功能。此產品可以應用于交流電的電流檢測,最大可檢測的電流為5A。 ==規格參數== # 工作電壓 :+5v # 尺寸大?。?30mm x 25mm # 重量大小:8g # 信號類型:模擬信號 ===引腳定義=== * S:信號引腳 * NC:不需要連接 * -:電源地 ==使用方法== [[文件:RB-02S08801.jpg|700px|縮略圖|居中]] [[文件:dianliuchuanganqi02.jpg|700px|縮略圖|居中]] S引腳接到控制器的A0口。NC和 - 分別接到電源的+5V和GND。注:NC可以不接 ==應用例程== ===示例程序=== <pre style='color:blue'> #define ELECTRICITY_SENSOR A0 // Analog input pin that sensor is attached to float amplitude_current; //amplitude current float effective_value; //effective current void setup() { Serial.begin(9600); pins_init(); } void loop() { int sensor_max; sensor_max = getMaxValue(); Serial.print("sensor_max = "); Serial.println(sensor_max); //the VCC on the RobotBase interface of the sensor is 5v amplitude_current=(float)sensor_max/1024*5/800*2000000; effective_value=amplitude_current/1.414;//minimum_current=1/1024*5/800*2000000/1.414=8.6(mA) //Only for sinusoidal alternating current Serial.println("The amplitude of the current is(in mA)"); Serial.println(amplitude_current,1);//Only one number after the decimal point Serial.println("The effective value of the current is(in mA)"); Serial.println(effective_value,1); } void pins_init() { pinMode(ELECTRICITY_SENSOR, INPUT); } /*Function: Sample for 1000ms and get the maximum value from the SIG pin*/ int getMaxValue() { int sensorValue; //value read from the sensor int sensorMax = 0; uint32_t start_time = millis(); while((millis()-start_time) < 1000)//sample for 1000ms { sensorValue = analogRead(ELECTRICITY_SENSOR); if (sensorValue > sensorMax) { /*record the maximum sensor value*/ sensorMax = sensorValue; } } return sensorMax; }</pre> ===程序效果=== 打開串口監視器之后,會輸出當前檢測到的模擬值。 ==產品相關推薦== [[文件:erweima.png|230px|無框|右]] ===購買地址=== [http://m.gharee.com/goods-689.html 電流檢測傳感器] ===周邊產品推薦=== [http://m.gharee.com/goods-167.html Arduino 旋轉角度傳感器] <br/> [http://m.gharee.com/goods-626.html 水蒸氣傳感器 雨水探測器 液位開關]<br/> [http://m.gharee.com/goods-196.html 通用傳感器連接線 3P杜邦連接線] ===相關問題解答=== ===相關學習資料=== [http://www.makerspace.cn/portal.php 奧松機器人技術論壇]
返回
(SKU:RB-02S088)電流檢測傳感器
。
來自“
http://m.gharee.com/wiki/index.php/(SKU:RB-02S088)電流檢測傳感器
”
導航菜單
個人工具
登錄
名字空間
頁面
討論
變換
查看
閱讀
查看源代碼
查看歷史
操作
搜索
導航
首頁
社區專頁
新聞動態
最近更改
隨機頁面
工具箱
鏈入頁面
相關更改
特殊頁面
頁面信息
隱私政策
關于ALSROBOT WiKi
免責聲明